01 / Problem
The part you cannot buy.
A broken mount. An obsolete component. A connection that never quite fits. Start with what needs to work.
AXISBREAK // Custom Manufacturing
Built for the thing you can't buy.
Have a finished model? We can manufacture it. Need a part that does not exist? We can design, prototype, and build it. Functional additive manufacturing for makers, product developers, repair teams, and small businesses.
Print-ready files
CAD + reverse engineering
Functional prototypes
Low-volume production
AXISBREAK / From problem to part
Start your projectFrom what if.To what works.
02 / Measure
Every interface matters.
Capture the geometry, clearances, loads, and environment. Understand the assembly before changing the part.
03 / Design
Turn constraints into geometry.
Build the CAD. Refine the fit. Choose the material and prototype where needed. A useful part begins with an intentional design.
04 / Manufacture
Make the solution tangible.
Manufacture the approved design, from a functional prototype to a short production run. Built around the job it needs to do.
Scroll to explore / select a chapter
Two project paths
Printing and engineering are not the same service.
If your model is ready, we keep manufacturing efficient. If you need us to create the model, reverse engineer a part, solve fit, or work through a real application, that is engineering work and we price it accordingly.
Print my file
You already have an STL, 3MF, or STEP file. We review printability, application, quantity, and material requirements, then quote the manufacturing work.
Best for ready-to-manufacture designs
Start a print project →Design my part
Bring a broken component, sketch, dimensions, assembly, photo, or simply the problem. We can create the CAD, select a manufacturing approach, prototype, and prepare it for production.
Custom engineering generally starts at $95
Request an engineering review →What we solve
Useful parts for real problems.
We focus on functional work where custom manufacturing creates real value. If an off-the-shelf part already solves the problem better, we will tell you.
Obsolete and replacement parts
Components that are unavailable, discontinued, or only sold as part of a larger assembly.
Brackets, mounts, and adapters
Purpose-built geometry that connects equipment, electronics, tools, cameras, and existing hardware.
Jigs, fixtures, and shop aids
Low-volume tooling that improves repeatability, setup, organization, or a hands-on process.
Prototypes and short runs
Parts for fit checks, functional testing, product development, and early production.
Material intelligence
You tell us the environment. We help choose the material.
A customer should not need to know whether PLA, PETG, ASA, TPU, nylon, or another process is right. Tell us what the part experiences and what failure would mean.
We consider temperature, UV, chemicals, load, impact, flexibility, fit, and expected service conditions before recommending a material or manufacturing route.
Specialty materials and colors may add acquisition cost and lead time. We make that visible in the quote before work begins.
Temperature exposureEvaluate
UV and weatherEvaluate
Mechanical loadEvaluate
Impact and fatigueEvaluate
Chemical environmentEvaluate
Fit and toleranceEvaluate
Simple by design
From problem to part.
You do not need to arrive with manufacturing vocabulary. Give us enough information to understand the job and we will guide the next step.
Describe
Send the file, photos, sketch, dimensions, use case, environment, quantity, and deadline you know.
Review
We determine feasibility, material needs, printability, and whether the project requires engineering.
Quote
Engineering and manufacturing are separated so the scope and cost are clear before paid work begins.
Build
We prototype when needed, validate the approved design, then manufacture the requested quantity.
The cost is not the plastic. It is the solution.
A custom part can use only a few dollars of material and still require real engineering time. Measurement, CAD, reverse engineering, material selection, prototyping, machine time, testing, failure allowance, and revision work are part of the job.
That is why custom design is quoted separately from manufacturing. It protects your project from shortcuts and protects our time from pretending engineering is free.
More than a print shop
Built by people who actually run the machines.
AXISBREAK combines hands-on additive manufacturing, CAD, electronics, software, and print-farm operations. We use that experience to make better manufacturing decisions, not just push files to a printer.
Need maker gear instead?
The store is still here for equipment, filament, accessories, and the things we use around additive manufacturing. Custom manufacturing is now the front door, not the only door.
Browse the shop →Running a print farm?
AXIOM is the operations platform we are building for serious 3D print-farm management. It stays part of AXISBREAK, while our current focus is helping customers solve manufacturing problems.
Explore AXIOM →Start with the problem
Need something that doesn't exist yet?
Send us what you know. A finished model, a broken part, a sketch, photos, dimensions, or simply the problem. We will tell you whether AXISBREAK is a good fit before paid work begins.
Start your project